11-06-23 Treso Powder Horn Valve w/Bushing

The "Fast Flow" powder valve was designed to provide a faster flow of powder and keep the physical size small. This valve, when in the open position, has a straight through 17/64" diameter hole for the fast flow of powder when hunting or participating in timed events. The body of this fast flow valve is actually smaller (9/16") than other valves resulting in a more aesthetically pleasing powder horn installation. The valve will accept standard flask spouts. The valve itself has a 3/8-24 male thread and comes complete with a knurled brass bushing. To install, drill a loose 7/16" hole and epoxy in place.

This is the same valve we use on our 02-335M O/T Powder Horn.

Warning: It is a bad practice to load directly out of a powder container of any kind. Always use a seperate measure.